|
Dielectric
|
Polypropylene
film
|
| Electrodes |
Vacuum evaporated metal |
| Coating |
Out wrapped with mylar tape and ends
seals with epoxy resin |
| Leads |
Axial leads of tinned wire |
| Reference Standard |
IEC 384 ¡V 2 grade I ; GB 7334 |
| Climatic Catalogue |
¡ß40¢J ~ ¡Þ85¢J |
| Capacitance versus Rated Voltage(UR) |
100VDC 0.01uF¡X10uF ; 250VDC 0.01uF¡X10uF |
| |
400VDC 0.01uF¡X2.2uF ; 630VDC 0.01uF¡X1.0uF |
| Capacitance Tolerance |
M = ¡Ó 20% K = ¡Ó10% J = ¡Ó 5% |
| Dissipation Factor (Tangent of Loss) |
DF¡Ø0.10% (at 20¢J,1KHZ) |
| Voltage Proof |
1.6¡ÑUR (1 minute at 20¢J) |
| Insulation Resistance |
C¡Ø0.33uF IR¡Ù15,000M£[
C¡Ö0.33uF IR¡ÑC¡Ù5,000M£[ (1 minute at 20¢Jand
RH¡Ø65%) |
| Insulation Resistance |
C¡Ø0.33uF IR¡Ù15,000M£[
C¡Ö0.33uF IR¡ÑC¡Ù5,000M£[ (1 minute at 20¢Jand
RH¡Ø65%) |
| Endurance |
1000 hours with 125% of rated voltage
at 85¢J, After the test:
C/C¡Ø5%; (DF) ¡Ø0.04%
C¡Ø0.33uF, IR¡Ù7,500M£[;
C¡Ö0.33uF, IR¡ÑC¡Ù2,500£[F (20¢J1KHZ) |
Metallized Polypropylene Film Capacitors (Tubular Type)
