Share To Facebook Share To Twitter Share To Plurk Share on Delicious Share on linkedin Share on Google+

    HMP/HME Type

    HMP/HME Type
      Enlargement
      Product Name : HMP/HME Type
      Product No : For-motor-application
      Inquiry
      Product Introduction

      For motor application

      Product Name :

      HMP/HME Type

      Goods of Description :

      HMP/HME are non-inductively wound with 
      a metallized polypropylene/polyester film dielectric/electrode, encapsulated in flame retardant (UL94, V-O) plastic case and epoxy resin end seal.
      1 HMP/HME-A…Fastion terminals.
      2.HMP/HME-S….Tinned copper clad steel wire radial leads.
      3.HMP/HME-W…Soldering terminals.
      4.HMP/HME-P….UL 1015 or UL 1007 stranded PVC insulation wire.

      Features :

      ■ Base Specification:
      a) IEC 33 (C0) 77…Used for AC motor application
      b) JIS C 4908 ….Used for electrical apparatus

      ■ Climate Category: In accordance with DIN40040 HSF
      a)H=Minimum Limit Temperature…-25      ℃
      b)S=Maximum Limit Temperature…+70      ℃
      c)F=Humidity Category…Average relative humidity       
      ≦75%, 95% for 30 days per year, continuously;
      85% for the remaining days occasionally.

      ■ Rated Voltage:…..250, 350, 400, 450 V.AC, 50~60 Hz
      ■ Capacitance Range:……………………0.1~15.0uF
      ■ Capacitance Tolerance:. J (±5%), U (+10, -5%), K (±10%)

      ■ Withstand Voltage:
      a)Between Terminals…1.5 x rated voltage for 10s.
      b)Between Terminals and Case
      …2 x rated voltage + 1000 V (1500 V Min.) for 60 s.
      This test occasional self-healing breakdown are allowed.

      ■ Dissipation Factor:
      ≦0.1% at 200 V.AC, 60 Hz and 20℃ (HMP type) 
      ≦0.3% at 200 V.AC, 60 Hz and 20℃ (HME type)

      ■ Insulation Resistance:
      a)Between Terminals..      ≧1 x104 MΩ for C≦1.0uF;
      ≧1 x104 MΩ.uF forC≦1.0uF

      b)Between Terminals and Case...≧1 x104 MΩ
      Back