X1 Film Capacitors
    Enlargement
    Product Name : X1 Film Capacitors
    Product No : X1-Class-310V-Flat
    Product Description

     

    SPECIFICATION

     

    ACROSS-THE-LINE AND INTERFERENCE SUPPRESSION CAPACITOIR CLASS X1 --- CTX

    1.    REFERENCE STANDARDS: UL 60384-14, CSA C22.2

    USED FOR ACROSS-THE LINE CAPACITORS, ANTENNA-COUPLING AND LINE-BY-PASS COMPONENTS.

    ENEC    EN (IEC) 60384-14 ed.42013      

    KC Mark     K60384-14

    USED FOR RADIO INTERFERENCE SUPPRESSION CAPACITORS.

    2.    RATED VOLTAGE : 310 VAC, 50 ~ 60 Hz

    3.    CAPACITANCE RANGE : 0.1 μ ~ 0.47μ

    4.    CAPACITANCE TOLERANCE : J (±5), K (±10), M (±20), U (+10-5)

    5.    DIELECTRIC : METALLIZED POLYPROPYLENE FILM (COATING MATERIALSAl-Zn)

    6.    DISSIPATION FACTOR TAN  δ  : LESS THAN 0.1 AT 1K Hz/20 ℃

    VOLTAGE 1.0 VAC (CAPACITANCE : 1K Hz/20 ℃, VOLTAGE 1.0 VAC)

    7.    INSULATION RESISTANCE : BETWEEN TERMINALS

    (1)   LESS THAN OR EQUAL TO 0.33 μF   ≧ 3 x 104

    (2)   GREATER THAN 0.33 μF ≧ 1 x 104 MΩ/μF

    MEASURED AT 100 ± 15 VDC, 60 Sec./20 ℃

    8.     WITHSTAND VOLTAGE :

    a)    BETWEEN TERMINALS…. 1333VDC FOR 60 Sec. OR 1700V.DC FOR 1Sec.

    CUT-OFF CURRENT 10mA

    b)    BETWEEN TERMIANLS AND CASE….2120 VAC 60 Hz FOR 60 Sec.

    9.  CLIMATIC CATEGORY : IN ACCORDANCE WITH DIN 40040 GLF

    G (MINIMUM LIMIT TEMPERATURE) = - 40 ℃

    L (MAXIMUM LIMIT TEMPERATURE) = + 110 ℃

    F (HUMIDITY CATEGORY) = AVERAGE RELATIVE HUMIDITY ≦ 75

                                  95 FOR 30 DAYS PER YEAR  CONTINUOSLY
                               85
    FOR THE REMAINING DAYS OCCASIONALLY

     

     

     

     

    橢圓: CTCHENG TUNG INDUSTRIAL CO., LTD.                         

    SHENG CHANG TECHNOLOGY CO., LTD.

    晟通實業有限公司

    盛昌科技有限公司

    NO. 88, RUIYUAN ST, BADE DIST, TAOYUAN CITY, TAIWAN TEL:886-3-3680909   FAX:886-3-3731717

     

     

    SPECIFICATION

     

    10.  DRY HEAT RESISTANCE :

    IN ACCORDANCE WITH DIN 40046 SHEET 1 OR IEC 68-2-2 TEST BA.CONDITIONS

    TEST TEMPERATURE : 110 ± 2 ℃

    TEST DURATION : 16 HOURS

    TEST CRITERIA :

    (1)   APPEARANCE : NO VISIBLE DAMAGE AND NO LEAKAGE

    (2)   WITHSTAND VOLTAGE : RATED WITHSTAND VOLTAGE 60 Sec.

    (3)   CAPACITANCE CHANGE : ≦±5 OF THE INITIAL VALUE

    (4)   INSULATION RESISTANCE : ≧50OF INITIAL SPECIFIED VALUE

    11.   COLD RESISTANCE :

    IN ACCORDANCE WITH DIN 40046 SHEET 1 OR IEC 68-2-1 TEST BA. CONDITIONS

    TEST TEMPERATURE : -40 ± 2 ℃

    TEST DURATION : 2 HOURS

    TEST CRITERIA :

    (1)   APPEARANCE : NO VISIBLE DAMAGE

    (2)   WITHSTAND VOLTAGE : RATED WITHSTAND VOLTAGE 60 Sec.

    (3)   CAPACITANCE CHANGE : ≦ ± 5 OF THE INITIAL VALUE

    12.  HUMIDITY TEST CONDITIONS :

    TEST TEMPERATURE : 40 ℃ ± 2 ℃

    RELATIVE HUMIDITY : 90 – 95

    TEST DURATION : 500 HOURS

    TEST CRITERIA :

    (1)   WITHSTAND VOLTAGE : RATED WITHSTAND VOLTAGE 60 Sec.

    (2)   CAPACITANCE DRIFT : ≦ ± 5 OF THE INITIAL VALUE

    (3)   DISSIPATION FACTOR : ≦0.8 OF INCREASED VALUE

    (4)   INSULATION RESISTANCE : ≧50 OF INITIAL SPECIFIED VALUE

     

     

     

     

     

    橢圓: CTCHENG TUNG INDUSTRIAL CO., LTD.                         

    SHENG CHANG TECHNOLOGY CO., LTD.

    晟通實業有限公司

    盛昌科技有限公司

    NO. 88, RUIYUAN ST, BADE DIST, TAOYUAN CITY, TAIWAN TEL:886-3-3680909   FAX:886-3-3731717

     

     

    SPECIFICATION

     

    13.  LIFE TEST CONDITIONS :

       TEST TEMPERATURE : 110 ℃ ± 3

    TEST VOLTAGE : 388 VAC AND 1,000 VAC/60 HZ FOR A PERIOD OF 0.1 Sec. ONCE

     EACH HOUR

       TEST DURATION : 1,000 HOURS

        TEST CRITERIA :

    (1)   APPEARANCE : NO VISIBLE DAMAGE AND NO LEAKAGE

    (2)   WITHSTAND VOLTAGE : RATED WITHSTAND VOLTAGE 60 Sec.

    (3)   CAPACITANCE DRIFT : ≦ ±10 OF THE INITIAL VALUE

    (4)   DISSIPATION FACTOR : ≦ 0.8 OF INCREASED VALUE

    (5)   INSULATION RESISTANCE : ≧ 50 OF SPECIFIED VALUE

    14.   SOLDERABILITY CONDITIONS :

    SOLDER BATH TEMPERATURE & MATERIAL :

    230 ± 5 ℃, 60 OF TIN (Sn) +40 OF LEAD (Pb)

    SOLDER BATH TEMPERATURE & MATERIAL :

    270 ± 5 ℃, 99.96 OF TIN (Sn) +0.04 OF SILVER (Ag)

    SOLDER TIME : 3 ± 0.5 Sec. TEST CRITERIA :75% OF THE SURFACE TINNING

    15.   SOLDERING HEAT RESISTANCE :

    IN ACCORDANCE WITH DIN 40046 SHEET 18 OR IEC 68-2-20 TEST TA.1TB.1

    CONDITIONS

    SOLDER BATH TEMPERATURE : 260 ± 5 ℃

    SOLDER TIME : 4 Sec.

    CAPACITANCE BODY MAY LIE ON PRINTING CIRCUIT BOARD

    TEST CRITERIA :

    (1)   APPEARANCE : NO DAMAGE AND GOOD TINNING

    (2)     CAPACITANCE CHANGE : ≦ ± 3 OF THE INITIAL VALUE

    16.   VIBRATION RESISTANCE :

    IN ACCORDANCE WITH DIN 40046 SHEET 8 OR IEC 68-2-6 TEST FC CONDITIONS

    FREQUENCE RANGE : 10 - 55 HZ

    DISPLACEMENT AMPLITUDE : 0.75 mm

    CONFORMING TO MAX. : 10 g

     

     

    橢圓: CTCHENG TUNG INDUSTRIAL CO., LTD.                         

    SHENG CHANG TECHNOLOGY CO., LTD.

    晟通實業有限公司

    盛昌科技有限公司

    NO. 88, RUIYUAN ST, BADE DIST, TAOYUAN CITY, TAIWAN TEL:886-3-3680909   FAX:886-3-3731717

     

     

    SPECIFICATION

     

    TEST DURATION : 6 HOURS

    TEST CRITERIA :

    (1) APPEARANCE : NO VISIBLE DAMAGE

    (2) CAPACITANCE CHANGE : ≦ ± 2 OF THE INITIAL VALUE

    17.  TENSILE STRENGTH OF TERMINALS

    IN ACCORDANCE WITH DIN 40046 SHEET 19 OR IEC 68-2-21 TEST UA.1

    CONDITIONS

    TERMINAL                                     LOAD FORCE       HOLDING TIMES

    DIA. (mm)                                            KG (N)                    Sec.

    ≦0.5                                                    0.5 (5)                         10

    0.5 TO 0.8                                   1.0 (10)                        10

    0.8                                                  2.0 (20)                        20

    TEST CRITERIA : NO WIRE BREAKAGE AND NO DAMAGE OF CAPACITOR

    18.  BENDING OF TERMINALS

    IN ACCORDANCE WITH DIN 40046 SHEET 19 OR IEC 68-2-21 TEST UB. CONDITIONS

    LOAD FORCE : 0.5 KG (5N)

    BENDING TIME : TWO CONSECUTIVE BENDS (4 x 90 ℃)

    TEST CRITERIA : NO WIRE BREAKAGE AND DAMAGE OF CAPACITOR

    19.    APPROVED BY :

    ULCUL      FILE NO. E193049        (0.0047uF/310V~10uF/310V)

    ENEC      Licence No. ENEC-01396-A1-M2(0.0047uF/310V~10uF/310V)

    KC MARK   HU03009-5003B 0.1uF  300V.AC

                HU03009-5001C 0.15uF  0.22uF  0.33uF  300V.AC

                HU03009-5002B 0.47uF  0.68uF  1.0uF  300V.AC

    CQC       Number CQC03001008997 (0.004710uF  310V.AC)

     

     

     

          

     

    橢圓: CTCHENG TUNG INDUSTRIAL CO., LTD.                         

    SHENG CHANG TECHNOLOGY CO., LTD.

    晟通實業有限公司

    盛昌科技有限公司

    NO. 88, RUIYUAN ST, BADE DIST, TAOYUAN CITY, TAIWAN TEL:886-3-3680909   FAX:886-3-3731717

     

     

    <span style="mso-bidi-font-size: 14.0pt; font-family: 'Arial','sans-serif';" lang

    Inquiry

    Product Introduction

    X1 Film Capacitors

    Product Name :

    X1 Film Capacitors

    Goods of Description :

    CTX are non-inductively wound with a metallized Polypropylene film dielectric/electrode, encapsulated in flame retardant (UL94,V-0) plastic case and epoxy resin end seal.

    Features :

    ■ Provides interference suppression, all safety approval
    ■ Overvoltage stress withstanding
    ■ Self-healing properties
    ■ Active and passive flame retardent

    Specification :

    Climate Category: In accordance with DIN40040 GMF
    a) G=Minimum Limited Temperature….-40

    b) M=Maximum Limited Temperature….+110
    .
    c) F=Humidity Category…Average relative humidity
    75%, 95% for 30 days per year, 
    continuously:85% for the remaining days, occasionally.

    ■ Rated Voltage:………310 V.AC, 50~60Hz
    ■ Capacitance Range:…………0.1~0.47uF
    ■ Capacitance Tolerance: J(±5%), K (±10%), M(±20%)

    ■ Withstand Voltage:

    a) Between Terminals..1333V.DC 1minute
    b) Between Terminals and Case…..2200V.AC, 60Hz 60s.

    ■ Dissipation Factor:
    a)
    0.1% at 1 KHz and 20
    b)
    0.3% at 10 KHz and 20

    ■ Insulation Resistance:
    a)Between Terminals……
    3 x 104; MΩ for C0.33uF;
               1 x 104 MΩ/uF for C>0.33uF;
    b)Between Terminals and Case………
    3 x 104 ; MΩ
    Measured at 100±15 V.DC, 60s 20

    Type :

    ■ Ideal for use in line bypass, antenna coupling,across-the-line and spark killer circuits.
    ■ Available for EMI filter.
    ■ Switching power supply applications.
    ■ Business machines appliances, such as: typewriters, adding machines, computer displays and monitors.
    ■ Household appliances, such as: mixers, fans, coffee grinders audio and TV circuits.
    ■ Thyristor and triac appliances, such as: dimmers.